CASTLE EURO Spécifications télécharger pdf (Page 9)

Castle Care-Tech Ltd. Engineering

Page 1 - 2 Chapter 1

COMPLIANCE STATEMENT

The Euro-MERiDIAN

range complies

with requirements

of the European

"EMC Directive"

(89/336/EC) and the "Low

Voltage Directive" (72/23/EC and

93/68/EC).

It is essential that the

recommendations in this

manual be followed, and that

equipment and wiring be

installed to avoid the effects of

potential sources of

interference.

DD243:2002

The Euro-MERiDIAN range fully

complies with requirements of

DD243:2002. This has been

verified using the BSIA

"Manufacturers Check List for

Compliance with the

Requirements of DD243:2002."

ALL appropriate facilities and

options are available for

systems using sequential

confirmation signalling EXCEPT:

Zeroing of 'Confirm Timer' if first

zone to alarm retriggers (see 9-6).

EXPANSION OF Euro-44+

Provision is made for an MSX

Card (MERiDIAN System

EXpander) to be slotted in to

the Euro-44+ End Station.

This enables the system to be

expanded, and the facilities

available further enhanced. For

details, see Chapter 24.

WARRANTY

Castle Care-Tech Ltd. will repair

or replace, at our discretion,

any product developing a fault

within 2 years, free of charge.

If the failure was the result of

physical damage, unauthorised

modifications or operating the

system outside of its

specification, we reserve the

right to raise an appropriate

repair charge.

REPAIRS

Products for repair should be

returned to the factory,

suitably packed to prevent

damage (including damage

from electrostatic discharges),

and be accompanied by the full

return address.

It is ESSENTIAL that full

details of the fault are

reported.

Note: If a software upgrade is

specifically required, this should

be clearly stated. For upgrades

from issue 2.05 or later this will be

chargeable. Older software issues

will be upgraded automatically

during repair to permit the use of

our current test equipment.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 197 198

Commentaires sur ces manuels

Chrisaroks 29 Apr 2024 | 02:45:00

Hello, im noob :)