Manual Euro-MERiDIAN
Chapter 13 Page 13 - 19
(ix) SET DATE and TIME
ALL log entries and the system
display include time and date.
This may be programmed in
Engineer OR Manager menu.
With the display showing
SET DATE & TIME?
Press YES
Year 00 - 98
[00]
Adjust year as required
(2000 to 2098), with numeric
keys.
Press YES
Month (1-12)
[01]
Adjust month as required
with numeric keys.
Press YES
Day (1-31)
[01]
Adjust date as required with
numeric keys.
Press YES
Hours (0-23)
[00]
Adjust hours as required
(using 24
-
hour clock) with
numeric keys.
Press YES
Minutes (0-59)
[00]
Press YES
SET DATE & TIME?
Press NO
Moves to next menu item
(x) EXIT MODES
‘TIMED’ mode sets the system
when the programmed exit
time has expired, provided all
zones on the exit route are
clear. Any ‘PTS’ button fitted
will be live also in this mode.
‘F
INAL DOOR’ mode, the setting
procedure will be completed
when a zone programmed as
‘Final Exit (FX)’ is closed. This
mode may also be used for
‘lock set’ operation: securing
the lock completes setting
procedure, unlocking starts
entry time.
If the ‘FX’ zone is closed before
the remainder of the exit route
is clear, it will be ‘stored’ and
acted on to complete the
setting procedure only after
the remainder of the exit route
is clear.
‘D
OOR/TIMED’ mode follows
‘timed’ operation, except that
the timer will be overridden if
a ‘final exit’ zone is opened and
closed before the timer
expires.
Note: NOT compliant with
DD243:2002.
‘PTS’ mode will override the
programmed exit time for the
area in question, and will be
endless.
Note: The PTS signal is NOT
stored. If pressed before the
exit route is clear, it will be
ignored.
Hello, im noob :)