Castle Equalizer Edgebander Manuel d'utilisateur télécharger pdf (Page 8)

 The Stock Guide goes on top of the Glue Pot Shield and is held in place by the two Tri-Arm

Knobs. The Stock Guide should be mounted so that the Laminate faces IN, towards the

machine. The Stock Guide and Glue Pot Shield come from the factory already assembled.

 To install the banding onto the Band Reel begin by removing the outer cover. Place the roll

of banding over the Expansion Fingers so that the tape hangs down, ready to travel in a

CLOCKWISE direction.

 Replace the outer cover and tighten the Lever.

 Working the Spokes in opposite directions will expand the Reel and center the tape roll.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Pas de commentaire

Castle Equalizer Edgebander Manuel d'utilisateur Page 8